air cleaning and purification systems

Independent laboratory tests have shown that many air of these units are removing various types of cleaning airborne pariculate and at efficiencies up to 99.9%, even on heavy particulate loads. A High Volume Water Injector The Monroe Dual Throat Air Scrubber utilizes a high volume wash water injector system purification that removes airborne particulate by delivering an initial systems surface inpingement shock air to heavy inlet dirt loads. Dual Adjustable Scrubbing Throats cleaning High velocity atomization takes place as the inlet air is directed through the fixed and dual adjustable scrubbing throats. The easily adjustable dual throats balance and the pressure drop through the air flow system at the start-up or after purification system changes systems are made. This design feature eliminates the need for ductwork dampers and blast gates that are prone to air and cleaning particulate build-up and require periodic maintenance. and In addition, the increase in pressure drop in the wash zone improves the overall effciency of the system. After passing through the turbulent dual throat wash zone, the air inpinges on the liquid purification surface, changes systems direction and then continues through deflectors and to a large, double row moisture eliminator section. Water droplets in the airstream are removed and drain back to the wash liquid reservoir tank. The clean, air dry air is then recirculated to the work area or discharged through exhaust ducts.

For over thirty years, major automotive cleaning and general industrial manufacturers have come to rely on Monroe Environmental and as their purification preferred source for maintaining superior air quality throughout their operations. systems Browse our site to better understand the products and services we air offer. cleaning and and Thanks for visiting MonroeEnvironmental.com. For oil mist, smoke and vapor removal from metal cutting fluids, metal processing coolants, synthetic fiber processing oils and other mist applications. Because of our experience, Monroe is able to purification provide systems equipment and services to meet in-plant level criteria of 0.5mg/m3 or less. oil, air mist, smoke and vapor removal efficiencies to 99.9% on 0.3 micron 500-80,000 CFM standard unit capacities, special designs available continuous drain low maintenance low energy requirements ergonomic considerations HEPA filter cleaning option is available as final filter stage Applications: metal cutting, and metal purification forming, parts washer exhaust, steel and aluminum, rolling mills, and synthetic fiber processes.

System Design The Monroe Spiral systems Tube Oil Mist Collector is a two stage unit and does not require filter media for primary air mist cleaning removal. The spiral tubes provide a high level of mist agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty air is propelled down several spiral shaped impaction tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% efficiency at 0.3 micron particle size. Ideally suited for production machining operations with water soluble, synthetic or mineral coolants. Oil Re-entrainment Eliminated Due to the unique internal design of the Monroe collector, the cleaned air will not re-entrain collected pollutants after the primary stage. This improves the efficiency of the separation process and extends the life of the optional final filters. The advanced design of the Monroe Spiral and Tube Collector provides purification maximum systems mist and oil collection efficiency in a mechanical collector.