air filter in manufacturing plants

System air and filter Design The Monroe Spiral Tube in Oil Mist Collector is a two stage unit and does manufacturing not require filter media for primary mist removal. plants The spiral tubes provide a high level of air mist agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty filter air is propelled down several spiral in shaped impaction tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% efficiency at 0.3 micron particle size. Ideally suited for production machining operations with water soluble, synthetic or mineral coolants. Oil Re-entrainment Eliminated Due to the unique internal design of the Monroe collector, the cleaned air will not re-entrain collected pollutants after manufacturing the primary stage. This plants improves air the efficiency of the separation process and extends the life of the optional final filter filters. The advanced design of the Monroe Spiral Tube Collector provides maximum mist and oil collection in efficiency in a mechanical collector.

Many manufacturing Configurations plants Available Monroe Multi-Stage Oil Mist Collectors are available in various air configurations to meet filter your needs. Units can be suspended from the ceiling or other supporting tructures to conserve floor space. System Design The Monroe Fiber Bed Mist Collector is a custom designed unit consisting of a continuous-duty, aerosol coalescing filter, fan assembly and, when needed, an optional pre-filter stage. Mist is coalesced using Koch-Otto York FLEXIFIBER® mist eliminators consisting of fine fibers. The compacted in media is in the form of cylindrical units. These long-life filters can provide several years of service before replacement is necessary. When the mist contains heavy droplets and/or dust particles, pre-filtering is provided by separate filters. The Monroe Fiber Bed Mist Collector is manufacturing available in capacities from 500 to 50,000 CFM in plants a single unit and may be integrated with existing duct work. The Monroe Fiber Bed Mist Collector is well suited for many oil mist applications including high production machining, asphalt fumes and air synthetic fiber processing. filter and in Many industrial and manufacturing chemical applications generate sub-micron plants mists. air The Monroe Fiber Bed Mist Collector, developed after lengthy research and testing, is an ideal solution for these troublesome mists. Mist particles filter are efficiently removed in through manufacturing interception, inertial plants impact, diffusion (Brownian movement) and gravitational sedimentation.