air filters at factories

Automatic Belt Tracking The Monroe air Oil Recovery Unit incorporates a specially designed drive filters pulley that at eliminates belt tracking factories problems. Unlike other air recovery units, periodic tracking adjustments are not required on the Monroe unit. This unique feature eliminates complicated adjustable bearing assemblies and their associated maintenance filters procedures. Heavy gauge steel at construction with welded seams and lifting hooks provides rugged factories durability. air Special construction materials and coatings filters are available. Large easy to open access doors at for all serviceable areas. Heated enclosure. factories For use in extreme cold the 12" & 24" model can incorporate insulated panels and an electric infrared or steam heater. An optional controller is available for variable speed operation. Complete electrical controls to meet customer air requirements are available. For over filters thirty years, major automotive and general industrial manufacturers have come to rely at and factories on Monroe air Environmental as their preferred source for maintaining superior air quality throughout their operations. Founded in 1971, the company''s irst project that year was to solve a difficult oil mist problem at an automotive plant. The existing collection system for a large grinding operation filters was not effective and oil dripped from at the ceiling and mist filled the air.After an evaluation, Monroe factories and air designed, built and installed a new system with source filters capture hoods, ducting and a 30,000 CFM collector.

The Monroe Oil Recovery Unit is heavily constructed at for industrial applications and consists of an endless belt, an electric motor and drive unit and a complete enclosure. The belt is suspended from a pulley, with the lower portion immersed in an oil supporting liquid. As the belt descends into the liquid, the floating oil adheres to both sides of factories the belt. Self-adjusting wipers mounted in a staggered position wipe air and filters the oil from the belt. The recovered oil drains into a trough for deposit into a storage tank or containers. The Monroe Oil Recovery Unit at operates unattended in any area of tranquil oil accumulation. It will continuously recover floating oil in a condition that permits disposal or reclaimation for other industrial purposes. Many different industries can prevent water pollution by recovering oily waste with a Monroe Oil Recovery Unit. Even factories the lightest oils from food processing can be air easily removed. The Monroe Oil Recovery Unit features a totally enclosed drive unit mounted inside the housing. The compact design provides easy drive access, excellent drive protection and maximum personnel safety. The filters entire drive unit is protected from weather, dirt and contaminants. The Monroe Oil Recovery Unit is provided with a full-width hinge door for easy access to all working components. The endless belt can be removed for repair or replacement at without disassembling factories the unit, air minimizing filters maintenance. The wiper assembly is self-adjusting to compensate for wear. Constant at pressure and alignment factories with the belt are assured.