air filters for chemical plants

The Monroe Spiral Tube Collector features heavy gauge mild steel and stainless steel air construction for years of efficient performance. Welded filters seams and built-in lifting hooks provide rugged durability. HEPA Type Filters The Monroe Spiral Tube Collector is available with specially constructed HEPA type fiberglass filter cartridges as the optional final filter system. These filters for are normally chemical supplied plants with a 95% efficiency rating at 0.3 micron. Final filters air have a long service life because the majority of airstream contaminants are removed by the spiral tube filters stage. Slide-out design for easy filter removal is included. Special for Features Large, easy to open access doors for all serviceable areas. An AMCA rated fan on the outlet side chemical of the collector with either a direct coupled motor or a "V" belt drive. Quiet operation. Rubber isolation fan connection and sound attenuators are available if needed. Under 80dba is typical. Integral differential pressure gauges are available to indicate when filter maintenance is required. Complete electrical controls are available to meet customer specific requirements. Monroe Spiral Tube plants Collectors can be configured to meet specific needs with numerous options available to provide maximum efficiency in any application.

System Design The Monroe Spiral Tube Oil Mist Collector is a two stage unit and does not require filter media for primary mist removal. The spiral tubes air provide a high filters and for level of mist agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty air is propelled down several spiral shaped impaction tubes and chemical a fluid film is plants and air and filters created. The oil drains into the collector bottom. Air changes for direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% efficiency at 0.3 micron particle size. chemical Ideally suited for production plants and air machining operations with filters water soluble, synthetic or mineral coolants. for Oil Re-entrainment Eliminated Due to chemical the unique internal design plants of the Monroe collector, the cleaned air air will not re-entrain collected pollutants filters after for the primary stage. This improves the efficiency of the separation process and extends the life of the optional final filters. The advanced chemical design of the Monroe Spiral Tube Collector provides maximum plants mist and oil collection efficiency in a mechanical collector.