air filters in manufacturing plants

An drag optional conveyor air can be included filters for continuous removal of settled in sludge for heavy dirt loads. Wide range of construction manufacturing materials. Mild steel, special coatings, stainless steel, plants fiberglass and air numerous other materials are available to meet intended applications. No moving parts in the collection area eliminates costly shut-down due to wear and abrasion, assuring optimum performance under continuous operating conditions. Complete electrical controls are available to meet customer specific requirements. Monroe Multiple Venturi Air Scrubber complete systems are available including filters and in a liquid clarifier, chemical feed equipment, instrumentation and electrical controls. Cartridge Dust Collectors Continuous collection and removal of airborne dust with reverse pulse cleaning of cartridges, allows operation without shutdown. The Monroe Cartrige Dust Collector manufacturing is designed to provide continuous-duty collection and removal of airborne dust produced by manufacturing and processing operations at 99+% efficiency on many installations. plants Through air the use of a Monroe Cartridge Dust Collector, these operations can discharge clean, filtered filters air back into the work area reducing climate control costs. The Monroe Cartridge Dust Collector modular design incoporates high efficiency, pleated cartridge filters to achieve maximum filter surface area in a relatively small housing. The cartridges are designed to provide a low static pressure drop.

Optional automatic in conveyors for drag removal of heavy, settled particulate and oil recovery units provide additional wash liquid cleaning for more efficient operation. The Monroe Air Scrubbers are constructed Dual Throat of mild steel for most applications. However, where manufacturing the intended use will involve plants corrosive or highly abrasive contaminants, other construction materials air such as stainless filters steel or reinforced fiberglass, as well as special coatings are availiable. Moisture eliminators also are constructed of materials suitable for the intended application, including polyethylene or stainless steel. Complete electrical controls are available to meet customer specific requirements. Monroe Dual can be configured to meet specific in needs. manufacturing Units can be drag equipped with conveyors to remove heavy, settled particulate and oil plants and air recovery units to remove accumulated filters oil. The Monroe Venturi Air Scrubber is a unique design, wet type, in high velocity, manufacturing high efficiency unit, with no moving parts. It is designed plants to remove airborne contaminants from industrial exhaust air systems and process gases. filters The airflow itself activates turbulent washing action in without a pump. The air and scrubbing liquid, alternately flow in and out of small venturi slots in the manufacturing multiple venturi section plants.