air filters in work areas

An air drag optional conveyor can be included for continuous removal of settled sludge for heavy dirt loads. Wide range of construction materials. Mild steel, special coatings, stainless steel, fiberglass and numerous other materials are available to meet intended applications. No filters moving parts in the collection area eliminates costly shut-down due to wear and abrasion, assuring optimum performance under continuous in operating conditions. Complete electrical controls are available to meet customer work specific requirements. Monroe Multiple Venturi Air Scrubber complete systems are available including a liquid clarifier, chemical feed equipment, instrumentation and electrical controls. Cartridge Dust Collectors Continuous collection and removal areas of airborne dust with reverse pulse cleaning of cartridges, allows operation without shutdown. The Monroe Cartrige Dust Collector is designed to provide continuous-duty collection and removal of airborne dust produced by manufacturing air and processing operations at 99+% efficiency on many installations. Through the use of a Monroe Cartridge Dust Collector, these operations can discharge clean, filtered air back into the work area reducing climate control filters costs. The Monroe Cartridge Dust Collector modular design incoporates high efficiency, pleated cartridge filters to achieve maximum filter surface area in a relatively in and work small housing. The cartridges areas are designed to provide a low static pressure drop.

System Design The Monroe Spiral Tube Oil Mist Collector is a two stage unit and does not require filter media for primary mist removal. The spiral tubes provide a high level of mist agglomeration air and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty air is propelled down several spiral filters shaped impaction tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters in the second stage HEPA type filter typically work rated at a minimum 95% efficiency at 0.3 micron particle size. Ideally suited for production machining operations with water soluble, areas synthetic or mineral coolants. Oil Re-entrainment Eliminated Due to the unique internal design of the Monroe collector, air the cleaned air filters will not re-entrain collected pollutants after the primary in stage. This improves the efficiency of the separation process and extends the life of the optional final filters. The advanced design of the Monroe Spiral Tube Collector provides maximum mist and oil collection efficiency in a mechanical collector.

The Monroe system eliminated the mist problem and provided a clean work area. In addition, collected mineral work oil was returned to the process for reuse. We are dedicated to giving each of our customers air quality solutions that continuously perform at maximum efficiency and at the lowest operating cost. Experience Monroe Environmental has produced thousands of air control devices for nearly every type of condition areas and requirement for our customers worldwide. This experience gives us the knowledge to accurately recommend the correct system for your application. Our experience also benefits our customers by providing high efficiency, low maintenance systems that produce the highest return on investment. Selection air Monroe filters Environmental offers many types of air cleaning equipment for a wide variety of applications. With our knowledge and expertise we can help you make the right system choice that will in provide the work best solution for your requirements. True Quality Most air treatment systems are expected to run at maximum efficiency for extended periods of time with little or no maintenance. This type areas of performance cannot be achieved with design or construction compromises. Our many repeat customers can testify that Monroe provides highly efficient systems for the long term.