air filtration at chemical plants

Independent air laboratory tests have shown that many of these units are removing various types of airborne pariculate filtration at efficiencies up to 99.9%, even on heavy particulate at loads. A High Volume Water Injector The Monroe Dual Throat Air Scrubber utilizes a chemical high volume wash water plants injector system that removes airborne particulate by delivering an initial surface inpingement shock to heavy inlet dirt loads. Dual Adjustable Scrubbing Throats High velocity atomization takes place air as the inlet air is directed filtration through the fixed and dual adjustable scrubbing throats. The easily adjustable dual throats balance the pressure drop through the air flow system at the start-up or after system changes are made. This at design feature eliminates the need for ductwork dampers chemical and blast gates that are prone to particulate build-up and require periodic plants maintenance. In addition, the increase in pressure drop in the wash zone improves the overall effciency of the system. After passing through the turbulent dual throat wash zone, the air inpinges on the liquid air surface, changes direction and then continues through deflectors and to a large, double row moisture eliminator section. Water droplets in the airstream are removed and drain back to the wash liquid reservoir tank. The clean, dry air is then recirculated to the work area filtration or discharged through exhaust at ducts.

Several configurations and options are offered for both units. Multiple units, vertical and horizontal models, special materials, and integration into complete environmental control systems are all available. Special chemical treatment and nutralizing options are also available when required. MONROE Vertical Packed Bed Air Washer Efficient chemical Design The Monroe Vertical Packed Bed Air Washer is a counter-current unit custom designed to meet or exceed the specific removal efficiency required. Of signigicant importance to the performance of any packed bed washer is the proper engineering for each application. plants Monroe engineers optimize the performance air of each unit by thorough analysis of: Monroe Vertical Packed Bed Washers are often included in complete pollution control systems to meet the demands of more complex processes for difficult to remove fumes. Efficient Design The Monroe Horizontal Packed Bed Air Washer is a cross flow unit custom designed to meet or exceed the specific removal efficiency required. Of signigicant importance to the performance of any packed bed washer is the proper engineering for each application. Monroe engineers optimize the performance of each unit by thorough filtration and at analysis of.

The Monroe Spiral Tube Collector features heavy gauge mild steel and stainless steel construction for years of efficient performance. Welded seams and built-in lifting hooks provide rugged durability. HEPA Type Filters The Monroe Spiral Tube Collector is available with specially constructed HEPA type fiberglass filter cartridges as the optional chemical final filter system. These filters are normally plants supplied with a 95% efficiency rating at 0.3 micron. Final filters have a long service air and filtration life because the majority of airstream contaminants are removed by the spiral tube stage. Slide-out design for easy filter removal is included. Special Features Large, easy to open access doors for all serviceable areas. An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or a "V" belt drive. Quiet operation. Rubber isolation fan connection and sound attenuators are available if needed. Under 80dba is typical. Integral differential pressure gauges are available to indicate when filter maintenance at is required. Complete electrical controls are available to chemical meet customer specific requirements. Monroe Spiral Tube Collectors can be configured to meet specific needs with numerous options available to provide maximum efficiency plants in any application.