air filtration for chemical process

Monroe carefully selects fiber bed filters to give constant efficiencies as high as 99.99% on all mist particles. For special applications, when mist is generated at high temperatures, Monroe provides custom designed condensing heat exchangers. Gas to air or gas to water heat air exchangers are offered, depending upon application. For heavy duty operations where filtration the mist is dirty or dust-laden, or when large oil droplets exist, Monroe provides multi-stage filtration with various pre-filtering elements followed by the fiber bed filters. The Monroe Coalescing Oil Mist Collector is designed to collect and remove airborne oil for mist, smoke and sub-micron vapors generated by operations chemical such as high production machining and cold forming. It is a multiple stage collector that has proven capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Coalescing Oil Mist Collector, high production process machining areas air using water filtration soluble, synthetic for or mineral coolants can discharge clean, filtered air back into the work area, reducing climate control costs. The Monroe Coalescing chemical Oil Mist Collector is available in capacities from 500 CFM to over process and air 80,000 CFM in a single unit, and may be integrated with existing ductwork and ventilation systems.

Independent laboratory tests have shown that many of these units are removing various filtration types of airborne pariculate at efficiencies up to 99.9%, even on heavy particulate loads. A High Volume Water Injector The Monroe Dual Throat Air Scrubber utilizes a high volume wash water injector system that removes airborne particulate by delivering for an initial surface inpingement shock to heavy inlet chemical dirt loads. Dual Adjustable Scrubbing Throats High velocity atomization takes place as the inlet process air is directed through the fixed and dual adjustable scrubbing throats. The easily adjustable air and filtration dual throats balance the pressure drop through the air flow system at the start-up or after system changes are made. This design for feature chemical eliminates the need for ductwork dampers and blast gates process that are prone to particulate build-up and require air periodic maintenance. In addition, the increase in pressure drop in the wash zone improves the overall effciency of the system. After passing through the turbulent dual throat wash zone, the air inpinges on the liquid surface, changes direction filtration and for then continues through deflectors and to a large, double row moisture eliminator section. Water droplets in the airstream are removed and drain back to the wash liquid reservoir tank. The clean, dry air is then recirculated to the work chemical area or discharged through exhaust ducts.

The Monroe Oil Recovery Unit is heavily constructed for industrial applications and consists of an endless belt, an electric motor and drive unit and a complete enclosure. The belt is suspended from process a pulley, with the lower portion immersed in an oil supporting liquid. As the belt descends into the liquid, the floating oil adheres to both sides of the belt. Self-adjusting wipers mounted air in a filtration staggered for position wipe the oil from the belt. The recovered oil chemical drains process into a trough for deposit into a storage tank air or containers. The Monroe Oil Recovery Unit operates unattended in any area of tranquil oil accumulation. It will continuously recover floating oil in a condition that permits disposal or reclaimation for other filtration industrial purposes. Many different industries can prevent water pollution by for recovering oily waste with a Monroe Oil Recovery Unit. Even the lightest oils from food processing can be easily removed. chemical The Monroe Oil Recovery Unit features a totally enclosed drive unit mounted inside the housing. The compact design provides easy drive access, excellent drive protection process and maximum personnel safety. The entire drive unit is air protected filtration from weather, dirt and contaminants. The Monroe Oil Recovery Unit is provided with for a full-width chemical hinge door for easy access to all working components. The endless belt can be removed for repair or replacement process and air and filtration without disassembling the unit, minimizing maintenance. for The wiper assembly is chemical self-adjusting to compensate for wear. Constant pressure and alignment with the belt process are assured.