air filtration in factories

The Monroe Spiral Tube Collector features heavy gauge mild steel and stainless steel construction for years of efficient performance. Welded seams and built-in lifting hooks provide rugged durability. HEPA Type Filters The Monroe Spiral Tube Collector is available with specially constructed HEPA type fiberglass air filter cartridges as the optional final filter system. These filters are filtration normally supplied with a 95% efficiency rating at 0.3 micron. Final filters have a long service life because the majority of airstream contaminants in are removed by the spiral tube stage. Slide-out design for easy filter removal is included. Special Features Large, easy to open access doors for all serviceable areas. An AMCA rated fan on the outlet side of the collector with either a factories direct coupled motor or a "V" belt drive. Quiet operation. Rubber isolation fan connection and sound attenuators are available if needed. Under 80dba air is typical. Integral differential pressure gauges are available to indicate when filter maintenance is required. Complete electrical controls are available to meet customer specific requirements. Monroe Spiral Tube Collectors can be configured filtration to meet specific needs with numerous in options available to provide maximum efficiency factories in any application.

An air drag optional conveyor can be included for continuous removal of settled sludge for heavy dirt loads. Wide range of filtration construction materials. Mild steel, special coatings, stainless steel, fiberglass and numerous other materials are available to meet intended in applications. No moving parts in the collection area eliminates costly shut-down due to wear and abrasion, assuring optimum performance under continuous factories operating conditions. Complete electrical controls are available to meet customer specific requirements. Monroe Multiple Venturi Air Scrubber air complete systems are available including filtration a liquid clarifier, chemical feed equipment, instrumentation and electrical controls. Cartridge Dust Collectors Continuous collection and removal of airborne dust with reverse pulse cleaning in of cartridges, allows operation without shutdown. factories The Monroe Cartrige Dust Collector is designed to provide continuous-duty collection and removal of airborne dust produced by manufacturing and processing operations at 99+% air efficiency on many installations. Through the use of a Monroe Cartridge Dust Collector, these operations can discharge clean, filtered air back into the work area reducing climate control costs. The Monroe Cartridge Dust Collector modular design incoporates high efficiency, pleated cartridge filters to achieve maximum filter surface area in a relatively small housing. The cartridges are designed to provide filtration a low static pressure drop.

The in Monroe Coalescing Oil Mist Collector is designed for continuous draining during operation, resulting in typical filter media life of 4,500 hours or more, even under heavy inlet loading. The Monroe factories Coalescing Oil Mist Collector, with longer operating cycles and higher collection efficiency, outperforms all other collectors. Because of slower internal velocities through the collector, medial replacement and maintenance labor costs are reduced. Collected oil mist and solids are continuously drained from the media without shut-down, significantly prolonging filter life and lowering overall air and filtration operating costs. Monroe Coalescing Oil Mist Collectors are available in various configurations to meet your needs. in Units can be suspended from the ceiling or other supporting structures to conserve floor space. Wet air scrubbers are designed to remove airborne particulates, contaminants, gases and odors from industrial exhaust and chemical processes. Remove Airborne Particulate factories Matter The Monroe DualScrubber is designed to remove air both heavy and light airborne particulate matter from industrial exhaust filtration systems, as well in as flue and factories process gasses. The Monroe Dual Air Throat Scrubber is a completely self contained unit that needs only to be connected to normal plant electrical, water and air systems.