air filtration in manufacturing plants

The cartridges in the Monroe collector are mounted in a vertical position. This assures that when the collected dust is pulsed from the cartridges, it falls to the bottom of the collector. In units with air horizontal catridges, filtration and in dust pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance for rotating manufacturing cartridge is necessary. This is avoided in the Monroe unit. The Monroe cartridges are easily accessed with pull out racks plants when replacement is necessary. The Monroe Cartridge Dust Collector is available air in capacities from 500 CFM to 50,000 CFM in a single unit and may be integrated with existing ductwork and ventilation systems. An AMCA rated fan on the outlet side of the collector filtration with either a direct coupled motor or an optional in and manufacturing "V" belt drive. Flexible duct connections, fan mounting isolators plants sound attenuators air and fan closures are available. filtration Integral Pressure Gauges are available to indicate when filter maintenance is required. Standard dust removal is via a slide gate. Options include rotary in and manufacturing air locks or an integral screw conveyor. Complete electrical controls are availiable to meet customer requirements. Heavy gauge steel is used for most installations, plants but special construction materials are available to meet specific applications.

The air Monroe Spiral Tube Collector features filtration heavy gauge in mild steel and stainless steel construction for years of efficient manufacturing performance. Welded seams and built-in lifting hooks plants provide air and filtration rugged durability. HEPA Type Filters The Monroe Spiral Tube Collector is available with specially constructed HEPA type fiberglass filter cartridges as the optional in and manufacturing final filter system. These filters are normally supplied with a 95% efficiency rating plants at 0.3 micron. Final filters have a long service life because the majority of airstream contaminants are removed by the spiral tube stage. Slide-out design for easy air filter removal is included. Special Features Large, filtration easy to open access doors for all serviceable areas. An AMCA rated fan on the outlet side in of the collector with either a direct coupled motor or a "V" belt drive. manufacturing and plants Quiet operation. Rubber isolation fan connection and sound attenuators are available if needed. Under 80dba is typical. Integral differential pressure gauges are available to indicate when filter maintenance is required. Complete electrical controls are available to meet customer specific requirements. Monroe Spiral Tube Collectors can be configured to meet specific needs with numerous options available to provide maximum efficiency in any application.