air filtration systems for woodshops

The Monroe system eliminated air the mist problem and provided a clean work area. In addition, filtration collected systems mineral oil was returned to the process for reuse. We are dedicated to giving each of our customers for air quality woodshops solutions that continuously perform at maximum efficiency and at the lowest operating cost. Experience Monroe Environmental has produced thousands of air control devices for nearly every type air and filtration of condition and requirement for our customers worldwide. This systems experience gives us the knowledge to accurately recommend the correct system for your application. Our experience also benefits our customers by providing high efficiency, low for maintenance systems that produce woodshops the air highest return on investment. Selection Monroe Environmental offers many types of air cleaning equipment for a wide variety of applications. With our knowledge and expertise we can help filtration and systems you make the right system choice that will provide for the best solution for your requirements. True Quality Most air treatment systems are expected to run at maximum efficiency for extended periods of time with little or no maintenance. This type of performance cannot be achieved with design or construction compromises. Our many repeat customers can testify that Monroe provides highly efficient systems for the long term.

The cartridges in the Monroe collector are mounted in a vertical position. This assures that when the collected dust is pulsed from the cartridges, it falls to the bottom of the collector. In units with horizontal catridges, dust pulsed woodshops from air and filtration above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance for rotating cartridge is necessary. This is avoided in the Monroe unit. The Monroe cartridges are easily accessed with pull out racks when replacement is necessary. The Monroe Cartridge systems Dust Collector is available in capacities from 500 CFM to 50,000 CFM in a single for unit and may be integrated with existing ductwork and ventilation systems. An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or an optional woodshops "V" belt drive. Flexible duct connections, fan air and filtration mounting isolators sound attenuators and fan closures are available. Integral Pressure systems Gauges for are available to indicate when woodshops filter maintenance is required. Standard dust removal is via a slide gate. Options include rotary air locks air and filtration or an integral systems screw conveyor. Complete electrical controls are availiable to meet customer requirements. Heavy gauge for steel is used for most installations, but special construction materials are available woodshops to meet specific applications.