air handlers

The Monroe air Oil Recovery Unit is heavily constructed for industrial applications and consists of an endless belt, an electric motor and drive unit and a complete enclosure. The belt is suspended from a pulley, with the lower portion immersed in an oil supporting liquid. As the belt descends into the liquid, the floating oil adheres to both sides of the belt. Self-adjusting wipers mounted in a staggered handlers position wipe the oil from air the belt. The recovered oil drains into a trough for deposit into a storage tank or containers. The Monroe Oil Recovery Unit operates unattended in any area of tranquil oil accumulation. It will continuously recover floating oil in a condition that permits disposal or reclaimation for other industrial purposes. Many different industries can prevent water pollution by recovering oily waste with a Monroe Oil Recovery Unit. Even the lightest oils from food processing can be easily removed. The Monroe Oil Recovery Unit features a totally enclosed drive handlers unit mounted inside the housing. The compact design provides easy air drive access, excellent drive protection and maximum personnel safety. The entire drive unit is handlers protected from weather, dirt air and contaminants. The Monroe Oil Recovery Unit is provided with a full-width hinge door for easy access to all working components. The endless belt can be removed for repair or replacement without disassembling the unit, minimizing maintenance. The wiper assembly is self-adjusting to compensate for wear. Constant pressure and alignment with the belt are assured.

Self-contained, handlers Single Unit Design The Monroe Multi-Stage Oil Mist Collector is designed to collect and remove airborne oil mist, smoke, and sub-micron vapors generated by operations such as high production machining and cold forming. It is a multiple stage collector that has proven capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Multi-Stage Oil Mist Collector, high production machining areas using water soluble, synthetic or mineral coolants can discharge clean, filtered air back into the work area, reducing air system costs. Broad Range of Industrial Capacities he Monroe Multi-Stage Oil Mist Collector is available in capacities from 500 CFM to over 80,000 CFM in a single unit and may be integrated with existing ductwork and ventilation systems. Designed for Minimum handlers Maintenance Air flow to filter media ratio is held air low to prevent saturation blocking. This eliminates down-time due to collector malfunction and minimizes periodic changing of filter handlers media. The Monroe Multi-Stage Oil Mist Collector is designed for continuous draining during operation, Design Leadership The Monroe Multi-Stage Oil Mist Collector, with more filter media, longer operating time between filter changes, and higher collection efficiency, outperforms all other collectors in its class.