air purification at chemical plants

The tangential whirling flow pattern of both air and liquid ascends the multiple venturi sections with dynamic air impingement creating high collection efficiency. The wash liquid is driven to the outside of the top moisture eliminator section of the scrubber purification by centrifugal force, then drains back to the bottom reservoir. Entrained dirt particles settle to the bottom at of the reservoir. Clean wash liquid is drawn from the surface of the chemical reservoir and ecirculated in a closed system, thus reducing water consumption. The Monroe Multiple Venturi Air Scrubber contains no moving parts. The entry area and the venturi throats are self-cleaning. The maintenance requirements for this unit are plants low. It is not necessary to enter the structure for air cleaning, as is required with many other air scrubbers. There is no packing required, water distributors to clean, nozzles to maintain, or mechanical purification devices to cause downtime. Once placed on line, the Monroe Multiple Venturi Air Scrubber operates continuously with at sustained chemical efficiency. Normally, the high efficiency of a single stage plants and air Monroe purification Multiple Venturi Air Scrubber will handle most industrial at processes.For difficult applications two or three stage systems are available. High removal efficiency can be achieved on chemical chemical fumes because of excellent liquid/gas contact and long residence time. The plants self induced water recirculating system provides a convenient means air and purification of adding neutralizing chemicals.

The cartridges in the Monroe collector are mounted in a vertical at position. chemical and plants This assures that when the collected dust is pulsed from the cartridges, it falls to the bottom of the collector. air In units with purification horizontal catridges, dust pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance for rotating cartridge is necessary. This is avoided in the Monroe unit. The at Monroe cartridges chemical are easily accessed with pull out racks when replacement is necessary. The Monroe Cartridge Dust Collector is available in capacities from 500 CFM to 50,000 CFM in a single unit and may be integrated with existing ductwork and ventilation systems. An AMCA plants rated fan on the outlet side of the collector with either a direct coupled motor or an optional "V" belt drive. Flexible duct connections, fan mounting isolators sound attenuators air and fan closures are available. purification Integral Pressure Gauges are available to indicate when at filter maintenance is required. Standard dust removal is via a slide gate. Options include rotary air locks or an integral screw conveyor. Complete electrical controls are availiable to meet customer requirements. Heavy gauge steel is used for most installations, but special construction materials are available to meet specific chemical and plants applications.