air purification in work areas

Independent laboratory tests have shown that many of these units are removing various types of airborne pariculate at efficiencies up to 99.9%, even on heavy particulate air loads. A High Volume purification Water Injector The Monroe Dual Throat Air Scrubber utilizes a high volume wash water injector system that removes in and work airborne particulate by delivering an initial surface inpingement shock to heavy inlet dirt loads. Dual Adjustable Scrubbing Throats High velocity atomization takes place as the inlet air is directed through the fixed and dual adjustable scrubbing throats. The easily areas adjustable dual throats air balance the pressure drop through the air flow system at the start-up purification or after system changes are in made. This design feature eliminates the need for ductwork dampers and blast gates that are prone work to particulate build-up areas and require periodic maintenance. In addition, the increase in pressure drop in the wash zone improves the overall air effciency of the system. After passing through the turbulent dual throat wash zone, the air inpinges on the liquid purification surface, changes direction and then continues through deflectors in and to a large, double row moisture eliminator section. Water droplets in the airstream are removed and drain back to the wash liquid reservoir tank. The clean, dry air is then recirculated work to the work area or discharged through exhaust ducts.

Optional automatic conveyors for drag removal of heavy, settled particulate and oil recovery units provide additional wash liquid cleaning for more efficient operation. The Monroe Air Scrubbers are constructed Dual Throat of mild steel for most applications. However, where the intended use will involve corrosive or highly abrasive contaminants, other construction materials such as stainless steel or reinforced fiberglass, as well as special coatings are availiable. Moisture eliminators also are constructed of materials suitable for the intended application, including polyethylene or stainless steel. Complete electrical controls are available to meet customer specific requirements. Monroe Dual can be configured to meet specific needs. Units can be drag equipped with conveyors areas to remove heavy, settled particulate and oil recovery units to air remove accumulated oil. The Monroe Venturi Air Scrubber is a unique design, wet type, high velocity, high efficiency unit, with no moving parts. It is designed purification to remove airborne contaminants from industrial exhaust systems and process gases. The airflow itself activates turbulent washing action without a pump. The air and scrubbing liquid, alternately flow in and out of small venturi slots in the multiple venturi section.

The Monroe Oil Recovery Unit in is heavily constructed for industrial applications and consists of an endless belt, an electric motor and drive unit and a complete enclosure. The belt is suspended from a pulley, work with the lower portion immersed in an oil supporting liquid. As the areas belt descends into the liquid, the floating oil adheres to both sides of the belt. Self-adjusting wipers mounted in a staggered position wipe the oil from the belt. The recovered oil drains into a trough for deposit into a storage tank or containers. The Monroe Oil air Recovery Unit operates unattended in any area of tranquil oil accumulation. It will continuously recover floating oil in a condition that permits disposal or reclaimation for purification other industrial purposes. Many different industries can prevent water pollution by recovering oily waste with a Monroe Oil Recovery Unit. in Even the lightest oils from food processing can be easily removed. The Monroe Oil Recovery Unit features a totally enclosed drive unit mounted inside the housing. The compact design provides easy drive access, excellent drive protection and maximum personnel safety. The entire drive unit is protected from weather, dirt and contaminants. The Monroe Oil Recovery Unit is provided with a full-width hinge door for easy access work to all working areas components. The endless belt can be removed for repair or replacement without disassembling the unit, minimizing maintenance. The wiper assembly is self-adjusting to compensate for wear. Constant pressure and alignment with the belt are assured.