air purifier filters

Self-contained, air Single Unit Design purifier The Monroe Multi-Stage Oil Mist Collector is designed to collect and remove airborne oil mist, smoke, and sub-micron vapors generated by operations such as high production machining and cold forming. It is a multiple stage collector filters that has proven air capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Multi-Stage Oil Mist Collector, high production machining areas using water soluble, synthetic or mineral coolants can discharge clean, filtered air back into the work area, reducing system costs. Broad purifier Range of Industrial Capacities he Monroe Multi-Stage Oil Mist Collector is available in capacities from 500 CFM to over filters 80,000 CFM in a single unit and may be integrated with existing ductwork and ventilation systems. Designed for Minimum Maintenance air Air flow to filter media ratio purifier is held low to prevent saturation blocking. This eliminates down-time due to collector malfunction and minimizes periodic changing of filter media. The Monroe filters Multi-Stage Oil air Mist Collector is designed for continuous draining during operation, Design Leadership The Monroe Multi-Stage Oil Mist Collector, with more filter media, longer operating time between filter changes, and higher purifier collection efficiency, outperforms all other collectors in its class.

Optional automatic conveyors for drag removal of heavy, settled filters particulate and oil recovery units provide additional wash liquid cleaning for more efficient operation. The Monroe Air Scrubbers are constructed Dual Throat of mild steel for most applications. However, where the intended use will involve corrosive or highly abrasive contaminants, other construction air materials such as stainless steel or reinforced fiberglass, as well as special coatings are availiable. Moisture eliminators purifier also are constructed of materials suitable for the filters intended application, including polyethylene or stainless steel. Complete electrical controls are available to meet customer specific requirements. Monroe Dual can be configured to meet specific needs. Units can be drag equipped air with conveyors to remove heavy, settled particulate and oil recovery units to remove accumulated oil. The Monroe Venturi Air Scrubber is a unique design, wet type, high velocity, high efficiency unit, with no moving parts. It is designed to remove purifier airborne contaminants from industrial exhaust systems and process gases. The airflow itself activates turbulent washing action without a pump. The air and scrubbing liquid, alternately flow in and out of small filters venturi slots in the multiple venturi section.

System Design The Monroe Spiral Tube Oil Mist Collector is a two stage unit and does not require filter media air for primary mist removal. The spiral tubes provide a high level of mist agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty air is propelled down several spiral shaped impaction tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% efficiency at 0.3 micron particle size. Ideally suited for production machining operations with water soluble, synthetic or mineral coolants. Oil Re-entrainment Eliminated Due to the unique internal design of the Monroe collector, the cleaned air will not re-entrain collected pollutants after the primary stage. This improves the efficiency of the separation process and extends the life of the optional final filters. purifier The advanced design of the Monroe Spiral Tube Collector provides maximum mist filters and oil collection efficiency in a mechanical collector.