air purifier in chemical plants

The cartridges in air the Monroe collector are mounted in a vertical position. This assures that when the collected dust is pulsed from the cartridges, it falls to the bottom of the collector. In units with horizontal catridges, dust pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance purifier for rotating cartridge is necessary. in This is avoided in the Monroe unit. The Monroe cartridges are easily accessed with pull out racks when replacement is necessary. The Monroe Cartridge Dust Collector chemical is available in capacities from 500 CFM to plants 50,000 CFM in a single unit and may be integrated air with existing ductwork and ventilation systems. An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or an optional "V" belt drive. Flexible duct connections, fan mounting isolators purifier sound attenuators and fan closures are available. Integral Pressure Gauges are available to indicate when filter maintenance is required. Standard dust removal is via a slide gate. Options include rotary air locks or an integral in screw conveyor. Complete electrical controls are availiable to chemical meet customer requirements. Heavy gauge steel is used for most installations, but special construction materials are available to plants meet specific applications.

Optional automatic conveyors for drag removal of heavy, settled particulate and oil recovery units provide additional wash liquid cleaning for more efficient operation. The Monroe Air Scrubbers are constructed Dual Throat of mild steel for most applications. However, air where the intended use will involve corrosive or highly abrasive contaminants, other construction materials such as stainless steel or reinforced fiberglass, as well as special coatings purifier are availiable. Moisture eliminators also are constructed of materials suitable for the intended application, including polyethylene or stainless steel. Complete electrical in controls are available to meet chemical and plants customer air specific requirements. Monroe Dual can be configured purifier to meet in specific needs. Units can be drag equipped with conveyors to remove heavy, settled particulate and oil recovery chemical units to remove accumulated oil. The Monroe Venturi Air plants Scrubber is a unique air design, wet type, high velocity, high efficiency unit, with no moving parts. It is designed to remove airborne contaminants from industrial exhaust systems and process gases. The airflow itself activates purifier turbulent washing action without a pump. The in air and scrubbing chemical liquid, alternately flow in and out of small venturi slots in the multiple plants venturi section.