air purifiers at plants

The Monroe Oil Recovery Unit is heavily constructed for industrial applications and consists of an endless belt, an electric motor and drive unit and a complete enclosure. The belt is suspended from a pulley, with the lower portion immersed in an oil supporting liquid. As the belt descends into the liquid, the floating air oil adheres to both sides of the belt. Self-adjusting wipers mounted in a staggered position purifiers wipe the oil from the belt. at The recovered oil drains into a trough for deposit into a storage tank or containers. The plants Monroe Oil Recovery Unit operates unattended in any area air and purifiers of tranquil oil at accumulation. It will continuously recover floating oil in a condition that permits disposal or reclaimation for other industrial purposes. Many different industries can prevent water pollution by recovering oily waste with a Monroe Oil Recovery Unit. Even the lightest oils plants from food air processing can be easily removed. The Monroe Oil Recovery Unit features a purifiers totally enclosed drive unit mounted inside the housing. at The compact design provides easy drive access, excellent drive protection and maximum personnel safety. The entire drive unit is protected from weather, dirt and contaminants. The Monroe Oil Recovery Unit plants is provided with a full-width hinge door for easy access to all air working components. The endless purifiers belt can be removed for repair or replacement without disassembling the unit, minimizing maintenance. The wiper assembly is self-adjusting to compensate at for wear. Constant pressure and alignment with the belt are assured.

Minimum Wash Liquid Requirements Waste Water disposal problems are eliminated under normal operating conditions. Each unit has a self-contained wash liquid reservoir and recirculating pump. An automatic water valve replentishes wash liquid lost through evaporation. A high kinetic energy is imparted to the particles contained in the dirt-laden air, and the airflow itself causes a high degree of atomization of the wash liquid. Welded seams and built-in lifting hooks provide rugged durability. Large, easy to open access doors, each with air tight seals, are provided for inspection and catridges servicing. Monroe Cartridge Dust Collectors can be configured to meet specific needs with options for most applications. Air processed by the Monroe Spiral Tube Collector meets air quality standards for in-plant discharge as well as outside exhaust. Discharging clean, filtered air back into the work area can significantly reduce climate control costs. Monroe Environmental Corporation provides air-scrubbing systems for difficult pollution control problems encountered in high temperature plants and air processes such as flame laminating and glass coating.

Independent laboratory tests have shown that many of these units are removing various types of airborne pariculate at efficiencies up to 99.9%, even on heavy purifiers and at particulate loads. A High Volume Water Injector The Monroe Dual Throat Air Scrubber utilizes a high volume wash water injector system that removes airborne particulate by delivering an initial surface plants inpingement shock to heavy inlet dirt loads. Dual Adjustable Scrubbing Throats High velocity atomization takes place as air the inlet air is directed through the fixed and dual adjustable purifiers scrubbing throats. The easily adjustable dual throats balance the pressure drop through the air flow system at the start-up or after system changes are made. This design feature eliminates at the need for ductwork dampers and blast gates that are prone to particulate plants build-up air and require periodic maintenance. In addition, the increase in pressure drop in the wash zone improves the overall effciency of the system. purifiers After passing through the turbulent dual throat wash at zone, the air inpinges on the liquid surface, changes direction and then continues through deflectors and to a large, double row moisture eliminator section. Water droplets in the airstream are removed and drain back to the wash liquid reservoir tank. The clean, dry air is then plants recirculated to the work area or discharged through exhaust ducts.