air purifiers for chemical plants

System Design The Monroe Spiral Tube Oil Mist Collector is a two stage air unit and does purifiers not require filter media for primary mist removal. The spiral tubes provide a high level of mist agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for for mist removal. Dirty air chemical is propelled down several spiral shaped impaction plants tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a air minimum 95% efficiency at 0.3 micron particle size. purifiers and for Ideally suited for production machining operations with water soluble, synthetic or mineral chemical coolants. Oil plants and air and purifiers Re-entrainment Eliminated Due to the unique internal design of the Monroe collector, the cleaned air will for not re-entrain collected chemical pollutants after the primary stage. This improves the efficiency of the separation process and extends the life of the optional final filters. The advanced design plants of the Monroe Spiral Tube Collector air provides maximum mist and oil collection efficiency in a mechanical collector.

The cartridges in the Monroe collector are mounted in a vertical position. This assures that when the collected dust purifiers and for is pulsed from the cartridges, it falls to the bottom of the collector. In units with horizontal catridges, dust pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance chemical for rotating cartridge is necessary. This is avoided in the Monroe unit. The Monroe cartridges are easily accessed with pull out racks when replacement is necessary. The Monroe Cartridge Dust Collector is available in capacities from 500 CFM to 50,000 CFM in a plants single unit and may be integrated with air existing ductwork and ventilation systems. An AMCA rated fan purifiers on the outlet side of the collector with either a direct coupled motor or an optional "V" belt drive. Flexible duct connections, fan mounting isolators sound attenuators and fan closures are available. Integral Pressure Gauges are available to indicate when filter maintenance is required. Standard dust for removal is via a slide gate. Options include rotary air locks or an integral screw conveyor. Complete electrical controls are availiable to meet customer requirements. Heavy chemical gauge steel is used for most installations, plants but special construction materials are available to meet specific applications.