air purifiers for work areas

Minimum Wash Liquid Requirements Waste Water disposal problems are eliminated air under normal operating conditions. Each unit has a self-contained wash liquid reservoir and recirculating pump. An automatic water valve replentishes wash liquid lost through evaporation. A high kinetic energy is imparted to the particles contained in purifiers the dirt-laden air, and the airflow itself causes a high degree of atomization of the wash liquid. Welded seams and built-in lifting for hooks provide rugged durability. Large, easy work to open access doors, each with air tight seals, are provided for inspection and catridges servicing. Monroe Cartridge Dust Collectors can be configured to meet specific needs with options for most applications. Air processed by the Monroe Spiral Tube Collector meets air quality standards for in-plant discharge areas as well as outside exhaust. Discharging clean, filtered air back into the work area can significantly reduce climate control costs. Monroe Environmental air Corporation provides air-scrubbing systems for difficult pollution control problems encountered in high temperature purifiers processes such as flame laminating and glass coating.

System Design The Monroe Spiral Tube Oil Mist Collector is a two stage unit and does not require filter media for primary mist removal. The spiral tubes provide a high level of mist agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty air is propelled for and work down several spiral shaped impaction tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% efficiency at 0.3 micron particle size. Ideally suited for production machining operations with water soluble, synthetic or mineral coolants. Oil Re-entrainment areas and air Eliminated Due to the unique internal design of the Monroe collector, the cleaned air will not re-entrain purifiers collected for pollutants after the primary stage. This improves the efficiency of the separation process and extends the life of the optional final filters. The advanced design of the Monroe Spiral Tube Collector provides maximum mist and oil work collection efficiency areas in a mechanical collector.

An drag air optional conveyor can be included for purifiers continuous removal of settled sludge for heavy dirt loads. Wide range of construction materials. for and work Mild steel, special coatings, stainless steel, fiberglass and numerous other materials are available to meet intended applications. areas No moving parts in the collection area eliminates costly shut-down air due to wear and abrasion, assuring optimum performance under continuous purifiers operating conditions. Complete electrical controls are available to meet customer specific requirements. Monroe Multiple Venturi Air Scrubber complete systems are available for including a liquid clarifier, chemical feed equipment, instrumentation and electrical controls. Cartridge Dust Collectors Continuous collection and removal of airborne dust with reverse pulse cleaning of cartridges, allows operation without shutdown. The Monroe Cartrige Dust Collector is designed to provide continuous-duty collection and removal of airborne dust produced by manufacturing and processing operations at 99+% efficiency on many installations. Through the use of a Monroe Cartridge Dust Collector, these operations can discharge clean, filtered air back into the work area reducing climate control costs. The Monroe Cartridge Dust Collector modular design incoporates high efficiency, pleated cartridge filters to achieve maximum filter surface area work in a relatively small housing. areas The cartridges are designed to provide a low static pressure drop.