air purifiers products

For over thirty years, major automotive and general industrial manufacturers air have come to rely on Monroe Environmental as their preferred purifiers source for maintaining superior products air quality throughout their operations. Browse our site to better understand the products and services we offer. Thanks for visiting MonroeEnvironmental.com. For oil mist, smoke and vapor removal from metal cutting fluids, air metal processing coolants, synthetic fiber processing oils and other mist applications. Because of our experience, Monroe is able to provide equipment and services to meet in-plant level purifiers criteria of 0.5mg/m3 or less. oil, mist, smoke and vapor removal efficiencies to 99.9% on 0.3 micron 500-80,000 CFM standard unit capacities, special designs available continuous drain low maintenance low energy requirements ergonomic considerations HEPA products filter option is available as final filter stage air Applications: metal cutting, metal forming, parts washer exhaust, steel and aluminum, rolling mills, and synthetic fiber processes.

Self-contained, Single Unit Design The Monroe Multi-Stage Oil Mist Collector is designed to collect and remove purifiers airborne products oil mist, smoke, and sub-micron vapors generated by operations such as high production machining and cold forming. It is a multiple stage collector that has proven capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Multi-Stage Oil Mist Collector, high production machining areas using water soluble, synthetic or mineral coolants can discharge clean, filtered air air back into the work area, reducing system costs. Broad Range of Industrial Capacities he Monroe Multi-Stage Oil Mist Collector is available in capacities from 500 CFM to over 80,000 CFM in a single unit and may be integrated with existing ductwork purifiers and ventilation systems. Designed for Minimum Maintenance Air flow to filter media ratio is held low to prevent saturation blocking. This eliminates down-time due to collector malfunction and minimizes periodic changing of filter media. The Monroe Multi-Stage Oil Mist Collector is designed for continuous draining during operation, Design Leadership The Monroe Multi-Stage Oil Mist Collector, with more filter media, longer products operating time between filter changes, and higher collection efficiency, outperforms all other collectors in its class.

The tangential whirling air flow pattern of both air and liquid ascends the multiple venturi sections with dynamic impingement creating high collection efficiency. The wash liquid is driven to the outside of the top moisture eliminator section of the scrubber by centrifugal force, then drains back to the bottom reservoir. Entrained dirt particles settle to the bottom of the reservoir. Clean wash liquid is drawn from the surface of the reservoir and ecirculated in a closed system, thus reducing water consumption. The Monroe Multiple Venturi Air Scrubber contains no moving parts. The entry area and the venturi throats are self-cleaning. The maintenance requirements for this unit are low. It is not necessary to enter the structure for cleaning, as is required with many other air scrubbers. There is no packing required, water distributors to clean, nozzles to maintain, or mechanical devices to cause downtime. Once placed on line, the Monroe Multiple Venturi Air Scrubber operates continuously with sustained efficiency. Normally, the high efficiency of a single stage Monroe Multiple Venturi Air Scrubber will handle most industrial processes.For difficult applications two or three stage systems are available. High removal efficiency can be achieved on chemical fumes because of excellent liquid/gas contact and long residence time. The self induced water recirculating system provides a convenient purifiers means of adding neutralizing products chemicals.