air scrubber chemical plants

The Monroe Spiral Tube Collector features heavy gauge mild steel and stainless steel air construction for years of efficient performance. Welded seams and built-in lifting hooks provide rugged durability. HEPA Type Filters The Monroe Spiral Tube Collector is available with specially constructed HEPA type fiberglass filter cartridges as the optional scrubber final filter system. These filters chemical are normally supplied with a 95% efficiency rating at 0.3 micron. Final filters have a long service life because the majority of airstream contaminants are removed by plants the spiral tube stage. Slide-out design for easy filter removal is included. Special Features Large, easy to open access doors for all serviceable areas. An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or a "V" belt drive. Quiet operation. Rubber isolation fan connection and sound attenuators are available if needed. Under 80dba is typical. air Integral differential pressure gauges are available to indicate when filter maintenance is required. Complete electrical controls are available to meet customer specific requirements. Monroe Spiral Tube Collectors can be configured to meet specific needs with numerous options available to provide maximum efficiency in any application.

The tangential whirling flow pattern scrubber of both air and liquid ascends the multiple venturi sections chemical with dynamic impingement creating high collection efficiency. The wash liquid is driven to the outside plants and air of the top moisture eliminator section of the scrubber by centrifugal force, then drains back to the bottom reservoir. Entrained dirt particles settle to the bottom of the reservoir. Clean wash liquid is drawn from the surface of the reservoir and ecirculated in a closed system, thus reducing water consumption. The Monroe Multiple Venturi Air Scrubber contains no moving parts. The entry area and the venturi throats are self-cleaning. The maintenance requirements for this unit are low. It is not necessary to enter the structure scrubber and chemical for cleaning, as is required with many other air scrubbers. There is no packing required, water distributors to clean, plants nozzles to maintain, or mechanical devices to cause downtime. Once placed on line, the Monroe Multiple Venturi Air Scrubber operates continuously air with sustained efficiency. Normally, the high efficiency of a single stage Monroe Multiple scrubber Venturi Air Scrubber will handle most industrial processes.For difficult chemical applications two or three stage systems are available. plants High removal efficiency can be achieved on chemical fumes because of excellent liquid/gas contact and long residence time. The self induced water recirculating system provides a convenient means of adding neutralizing chemicals.

Minimum Wash air Liquid Requirements scrubber Waste Water disposal problems are eliminated chemical under normal operating conditions. plants Each unit has a self-contained wash liquid reservoir and recirculating pump. An automatic water valve air replentishes wash liquid lost through evaporation. A high kinetic energy is imparted to the particles contained in the dirt-laden air, and the scrubber airflow itself causes a high degree of atomization of the wash liquid. Welded seams and built-in lifting hooks provide rugged durability. Large, easy to open access doors, each with air tight seals, are provided for inspection and catridges servicing. Monroe Cartridge Dust Collectors can be configured to meet specific needs with options for most applications. Air processed by the Monroe Spiral Tube Collector meets air quality standards for in-plant discharge as well as outside exhaust. Discharging clean, chemical filtered air back into the work area can significantly plants reduce climate control costs. Monroe Environmental Corporation provides air-scrubbing systems for difficult pollution control problems encountered in high temperature processes such as flame laminating and glass coating.