air scrubber chemical process

Independent laboratory air tests have shown that many of these units are removing various types of airborne pariculate at efficiencies up to 99.9%, scrubber even on chemical heavy particulate loads. A High Volume Water Injector The Monroe Dual Throat Air Scrubber utilizes a high volume wash water injector system that removes airborne particulate process by delivering an initial surface inpingement shock to heavy inlet dirt loads. Dual Adjustable Scrubbing Throats High velocity atomization takes place as the inlet air air is directed through the fixed scrubber and dual adjustable scrubbing throats. The easily chemical and process and air adjustable scrubber and chemical and process dual throats balance the pressure drop through the air flow system at the start-up or after air system changes are scrubber made. This design feature eliminates the need for ductwork chemical dampers and blast gates that are prone to particulate build-up and require periodic maintenance. In process addition, the increase in pressure drop in the wash zone improves the overall effciency of the system. After air passing through the turbulent dual throat scrubber wash zone, the air inpinges on the liquid surface, changes direction and then chemical continues through deflectors and to a large, double row moisture eliminator section. Water process droplets air in the airstream scrubber are removed and drain back chemical to the wash liquid reservoir tank. process The clean, dry air is then recirculated to the work area or discharged through exhaust ducts.

The cartridges in the Monroe collector are mounted in a vertical position. This assures that when the collected dust is pulsed from the cartridges, air it falls to the bottom of the collector. In units with horizontal catridges, dust pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance for rotating cartridge is necessary. scrubber This is avoided in the Monroe unit. The Monroe cartridges chemical are easily accessed with pull out racks when replacement process is necessary. The Monroe Cartridge Dust Collector is available in capacities air from 500 CFM to 50,000 CFM in a single unit scrubber and may be integrated with existing ductwork and ventilation systems. An AMCA rated fan chemical and process on the outlet side of the collector with either a direct coupled motor or an optional "V" belt drive. Flexible duct connections, fan mounting isolators air sound attenuators and fan closures are available. Integral scrubber Pressure Gauges are available to indicate chemical when filter maintenance is required. Standard dust removal is via a slide gate. Options include rotary air locks or an integral process screw conveyor. Complete electrical controls are availiable air to meet customer requirements. Heavy gauge steel is used for most installations, but special construction scrubber materials are available to meet specific applications chemical and process.