air scrubbers in chemical plants

System Design The Monroe Spiral Tube Oil Mist Collector is a air two stage unit and does not require filter media for primary mist removal. The spiral tubes provide a high level of mist agglomeration and removal without using filters. scrubbers Centrifugal in force and impaction provide the mechanism for mist removal. Dirty air is propelled down several spiral shaped impaction tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% chemical efficiency plants at 0.3 air micron particle size. Ideally suited for production machining operations with water soluble, synthetic or mineral coolants. scrubbers and in Oil Re-entrainment Eliminated Due to the unique internal design of the Monroe collector, chemical and plants the cleaned air will not re-entrain air collected pollutants after the primary stage. This improves the scrubbers and in efficiency of the separation process and extends the life of the optional final filters. The advanced design of the Monroe Spiral Tube Collector provides maximum mist and oil collection efficiency in a mechanical collector.

Monroe carefully selects fiber bed filters to give constant efficiencies as high as 99.99% on all mist chemical particles. For special applications, when mist is generated at high plants temperatures, Monroe provides custom designed condensing heat exchangers. Gas air to air or gas to scrubbers water heat exchangers are offered, depending upon application. in For heavy duty operations where the chemical mist is dirty or dust-laden, plants or when large oil droplets air exist, Monroe provides multi-stage filtration with various pre-filtering elements followed by the fiber bed filters. The Monroe Coalescing Oil scrubbers Mist Collector is designed to collect and remove airborne oil mist, smoke and sub-micron vapors generated by operations such as high in production machining and cold forming. chemical It plants is a multiple stage collector that air has proven capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Coalescing Oil Mist Collector, high production machining scrubbers areas using water soluble, synthetic or mineral coolants can discharge clean, filtered air back into the work area, reducing climate control costs. The Monroe in and chemical Coalescing Oil Mist Collector is available in capacities from 500 CFM to over 80,000 CFM plants in a single unit, and may be integrated with existing ductwork and ventilation systems.