air scrubbers

System Design The Monroe Spiral Tube Oil Mist Collector is a two stage unit and does not require filter media for primary mist removal. air The spiral tubes provide a high level of mist agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty air is propelled down several spiral shaped impaction tubes and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% efficiency at 0.3 micron particle size. Ideally suited for production machining operations with water soluble, synthetic or mineral coolants. Oil Re-entrainment Eliminated Due to the unique scrubbers internal design of the Monroe collector, the cleaned air will not re-entrain collected pollutants after the primary stage. This improves the efficiency of the separation process and extends the life of the optional final filters. The advanced design of the Monroe Spiral Tube Collector provides maximum mist and oil collection efficiency in a mechanical collector.

Minimum Wash air Liquid Requirements Waste Water disposal problems are eliminated under normal operating conditions. scrubbers Each unit has a self-contained wash liquid air reservoir and recirculating pump. scrubbers An automatic water valve replentishes wash liquid lost through evaporation. A high kinetic energy is imparted to the particles contained in the dirt-laden air, and the airflow itself causes a high degree air of atomization scrubbers of the wash liquid. Welded seams and built-in lifting hooks provide rugged durability. Large, easy to open access doors, each with air tight seals, are provided for inspection and catridges servicing. Monroe Cartridge Dust Collectors can be configured to meet specific needs with options air for most applications. Air processed by the Monroe Spiral Tube Collector meets air quality standards for in-plant discharge as well as outside scrubbers exhaust. Discharging clean, filtered air back into the work area can significantly reduce climate control air costs. Monroe Environmental Corporation provides air-scrubbing systems for difficult pollution control problems encountered in high temperature processes such as flame laminating and glass coating.

Recirculate Clean scrubbers and air Air In many installations, such as buffing and polishing, metal finishing and grinding foundry operations etc., it is possible to recirculate clean, contaminant-free air back to the work area. This reduces the cost of plant ventilation systems and climate control needs. Proven High Efficiency Monroe Dual Throat Air Scubbers are currently operating continuously scrubbers at high efficiency in many types of industrial installations throughout the United States, Mexico and Canada. Cartridge cleaningis accomplished by reverse compressed air pulses through a few cartridges at a time, allowing continuous operation without shut-down. These reverse pulses, with a velocity of twice the speed of sound, break away caked dust from the cartridge so that it can drop the collector air bottom. Because of slower internal velocities through scrubbers the collector, media replacement and maintenance labor costs are reduced. Collected oil mist and solids are continuously drained from the media without shut-down, significantly prolonging filter life and lowering overall operating air costs. The Monroe Fiber Bed Mist Collector removesparticles as fine as 0.3 micron. While normal filters permit these particles to re-entrain into the outgoing clean air, Monroe''s self-draining filter is designed to scrubbers prevent oil re-entrainment and recirculate clean air to the atmosphere.