air ventilation

Minimum Wash Liquid Requirements Waste Water air disposal problems are eliminated under normal operating conditions. Each unit has a self-contained ventilation wash liquid reservoir and recirculating pump. An automatic water valve replentishes wash liquid lost through evaporation. A high kinetic energy is imparted to air the particles contained in the dirt-laden air, ventilation and the airflow itself causes a high degree of atomization of the wash liquid. Welded seams and built-in lifting hooks provide rugged durability. Large, easy to open access doors, each with air tight seals, are provided for inspection and catridges servicing. Monroe Cartridge Dust Collectors can be configured to meet specific needs with options for most applications. Air processed by the Monroe Spiral Tube Collector meets air quality standards for in-plant discharge as well as outside exhaust. Discharging air clean, filtered air back into the work area can significantly reduce climate control costs. Monroe Environmental Corporation provides air-scrubbing systems for difficult pollution control problems encountered in high temperature processes such as flame laminating and glass coating.

Recirculate Clean Air In many installations, such as buffing and polishing, metal finishing and grinding foundry operations etc., it is possible to recirculate clean, contaminant-free air back to the work area. This reduces the ventilation cost of plant ventilation systems and climate control needs. Proven High Efficiency Monroe Dual Throat Air Scubbers are currently operating continuously at high efficiency in many types of industrial installations throughout the United States, Mexico and Canada. Cartridge air cleaningis accomplished by reverse compressed air pulses through a few cartridges at a time, allowing continuous operation without shut-down. These reverse pulses, with a velocity of twice the speed of sound, break away caked dust from the cartridge so that it can drop the collector bottom. Because of slower internal velocities through the collector, media replacement and maintenance labor costs are reduced. Collected oil mist and solids are continuously drained ventilation from the media without shut-down, significantly prolonging filter life and lowering overall operating costs. The Monroe Fiber Bed Mist Collector removesparticles as fine as 0.3 micron. air While normal filters permit these particles to re-entrain ventilation into the outgoing clean air, Monroe''s self-draining filter is designed to prevent oil re-entrainment and recirculate clean air to the atmosphere.

For over thirty years, major automotive air and general industrial manufacturers have come to rely on Monroe Environmental as their preferred source for maintaining superior air quality throughout their operations. Browse our site to better understand the products and services we offer. Thanks for visiting MonroeEnvironmental.com. ventilation For oil mist, smoke and vapor removal from metal cutting fluids, metal processing coolants, air synthetic fiber processing oils and other mist applications. Because of our experience, Monroe is able to provide equipment and services to meet in-plant level criteria of 0.5mg/m3 or less. oil, mist, smoke and vapor removal efficiencies to 99.9% on 0.3 micron 500-80,000 CFM standard unit capacities, special designs available continuous drain low maintenance low energy requirements ergonomic considerations HEPA filter option is available as final filter stage Applications: metal cutting, ventilation metal forming, parts washer exhaust, steel and aluminum, rolling mills, and synthetic fiber processes.