clean air machines

Optional automatic conveyors for drag removal of heavy, settled particulate and clean oil recovery air units provide additional wash liquid cleaning for more efficient operation. The Monroe Air Scrubbers are constructed Dual Throat of mild steel for most applications. machines However, where the intended use will involve corrosive or highly abrasive contaminants, other construction materials such as stainless steel or reinforced fiberglass, as well as special coatings are availiable. Moisture eliminators also are constructed of materials suitable for the intended application, including polyethylene or stainless steel. Complete electrical controls are available to meet customer specific requirements. Monroe Dual can be configured to meet specific needs. Units can be drag equipped with conveyors to remove heavy, settled particulate and oil recovery units to remove accumulated clean oil. The Monroe Venturi Air Scrubber is a unique design, wet type, high velocity, high efficiency unit, with no moving parts. It is designed to remove airborne contaminants from industrial exhaust systems and process gases. The airflow itself activates turbulent washing action without a pump. The air and scrubbing liquid, alternately flow in and out of small venturi slots in the multiple venturi air section.

Minimum Wash Liquid Requirements Waste machines and clean Water disposal problems are eliminated under normal operating conditions. Each unit has a self-contained wash liquid reservoir and recirculating pump. An automatic water valve replentishes wash liquid lost through evaporation. A high kinetic energy is imparted to the particles contained in the dirt-laden air, and the airflow itself causes a air high degree of atomization of the wash liquid. machines Welded seams and built-in lifting clean hooks provide rugged durability. Large, easy to open access doors, each with air tight seals, are provided for inspection and catridges servicing. Monroe Cartridge Dust Collectors can be configured to meet specific needs with options for most air applications. Air processed by the Monroe Spiral Tube Collector meets machines air quality standards for in-plant clean discharge as well as outside exhaust. Discharging clean, filtered air back into the work area can significantly air reduce climate control costs. Monroe machines Environmental Corporation provides air-scrubbing systems for difficult pollution clean control problems encountered in high temperature processes such as air and machines flame laminating and glass coating.

The cartridges in the Monroe collector are mounted in a vertical position. This assures that when the collected dust is pulsed from the cartridges, it falls to the bottom of the collector. In units with horizontal catridges, dust clean pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance for rotating cartridge is necessary. This is avoided in the Monroe unit. The Monroe cartridges are easily accessed with pull out racks when replacement is necessary. air The Monroe Cartridge Dust Collector is available in capacities machines from 500 CFM to 50,000 CFM clean in a single unit and may be integrated with existing ductwork and ventilation systems. An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or an optional "V" belt drive. Flexible duct connections, fan mounting air isolators sound attenuators and fan closures are available. Integral Pressure Gauges are available to indicate when filter maintenance is required. machines and clean Standard dust removal is via a slide gate. Options include rotary air locks or an integral screw conveyor. Complete electrical controls air are availiable to meet customer requirements. Heavy gauge steel is used for most installations, but special construction materials are available to meet machines specific applications.