factory air quality

Contaminants formed in hese processes are frequently highly corrosive, factory hazardous and/or difficult to remove. Removal often] requires air and quality contaminant incineration at temperatures exceeding 1,500°F. Through proper quenching factory and gas conditionaing air techniques, quality and factory and air Monroe can provide reclamation of costly chemicals and compounds contained within the off-gasses. Monroe Environmental quality engineers analyze factory each application individually to determine the most cost-efficient, effective solution. Monroe has an extensive arsenal of standard air scrubbing equipment offered air in a variety of standard and quality special construction factory materials backed up by over twenty years of experience in solving such complex problems. air Customized for Each Application The MONROE Vertical Packed Bed Air Washer and the MONROE Horizontal Packed Bed Air Washer are specially sized quality and factory for each application to provide high efficiency, low cost gas cleaning. Monroe Environmental will evaluate fume removal requirements and determine optimum design parameters for each installation. The packing media is uniquely shaped to provide adequate surface air area and a high number of small impact passages to enhance . The resultant effect is a high scrubbing efficiency, allowing optimum packing section length with more compact design and lower pressure drop.

Independent laboratory tests have shown that many of these units are removing quality various types of airborne pariculate factory at efficiencies up air to 99.9%, even on heavy particulate loads. A High Volume quality Water Injector The Monroe Dual Throat Air Scrubber utilizes a high volume wash water injector system that removes airborne particulate by delivering an initial surface inpingement shock to heavy inlet dirt loads. Dual Adjustable Scrubbing Throats High velocity factory atomization takes place as the inlet air is directed air through the fixed and dual adjustable scrubbing throats. The easily adjustable dual throats balance the pressure drop through the air flow system at the start-up or after system changes quality are made. This design feature eliminates the factory need for ductwork dampers and blast gates that are prone to particulate build-up and require periodic maintenance. In addition, the increase in pressure drop in the wash air zone improves the overall quality effciency of the system. After passing through the turbulent dual throat wash zone, the air inpinges on the liquid surface, changes direction and then continues through deflectors and to a large, double row moisture eliminator factory section. Water air droplets in the airstream are removed and drain back to the wash quality liquid reservoir tank. The clean, dry air is then recirculated to the work area or discharged through exhaust ducts.