fume control equipment

Optional automatic conveyors for drag removal of heavy, settled particulate and oil recovery units provide additional fume wash liquid cleaning control for more efficient operation. The Monroe Air Scrubbers are constructed Dual Throat of mild steel for most applications. However, where the intended use will involve corrosive or highly abrasive contaminants, other construction materials such as stainless steel or reinforced fiberglass, as well as special coatings are availiable. Moisture eliminators also are constructed of materials suitable for the intended application, including polyethylene or stainless steel. Complete electrical controls are available to meet customer specific requirements. Monroe Dual can be configured equipment to meet specific needs. Units can be drag equipped with conveyors to remove fume heavy, control settled equipment particulate and oil recovery units to remove accumulated oil. The Monroe Venturi Air Scrubber is a unique design, wet type, high velocity, high efficiency unit, with no moving parts. It is designed to remove airborne contaminants from industrial fume exhaust systems and process gases. The airflow itself activates turbulent washing action without a pump. The air and scrubbing liquid, alternately flow in control and out of small venturi slots in the multiple venturi section.

Monroe carefully selects fiber bed filters to give constant efficiencies equipment as high as 99.99% on all mist particles. fume For special applications, when mist is generated at high temperatures, Monroe provides custom designed condensing control heat exchangers. Gas to air or gas to water heat exchangers are offered, depending upon application. For equipment heavy duty operations where the mist is dirty or dust-laden, or when large oil droplets exist, Monroe provides multi-stage fume filtration with various pre-filtering elements control followed by the fiber bed filters. The Monroe Coalescing Oil Mist Collector is designed to collect and remove airborne oil mist, smoke and sub-micron vapors generated by operations such as high production machining and cold forming. It is a multiple stage collector that has proven capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Coalescing Oil Mist Collector, high production machining areas using water soluble, synthetic or mineral coolants can discharge clean, filtered air back into the work area, reducing climate control costs. The Monroe Coalescing Oil Mist Collector equipment is available in capacities from 500 CFM to over 80,000 CFM in a single unit, and may be integrated with existing ductwork and ventilation systems.

Self-contained, Single Unit Design The Monroe Multi-Stage Oil Mist Collector is designed to collect and remove airborne oil mist, smoke, and sub-micron vapors generated by operations such as high production machining and cold fume forming. It is a multiple stage collector that has proven capabilities exceeding 99% efficiency on many installations. control After equipment installation of a Monroe Multi-Stage Oil Mist Collector, high production machining areas using water soluble, synthetic or mineral coolants can discharge clean, filtered air back into the work area, reducing system costs. Broad Range of Industrial Capacities he Monroe Multi-Stage Oil Mist Collector is available in capacities from 500 CFM to over 80,000 CFM in fume a single control unit and may be integrated with existing ductwork and ventilation systems. Designed for Minimum Maintenance Air flow to filter media ratio is held low to prevent saturation blocking. This eliminates down-time due to collector malfunction and minimizes periodic changing of filter media. The Monroe Multi-Stage Oil Mist Collector is designed for continuous draining during operation, Design Leadership The Monroe Multi-Stage Oil Mist Collector, with more filter media, longer operating time between equipment filter changes, and higher collection efficiency, outperforms all other collectors in its class.