high pressure air purification

Independent laboratory tests have shown that many of these units are removing various types of airborne pariculate at efficiencies up to 99.9%, even on heavy particulate loads. A High Volume Water Injector The Monroe Dual Throat Air Scrubber utilizes a high volume wash water injector system that removes airborne particulate by delivering an initial surface inpingement shock to heavy inlet dirt loads. Dual Adjustable Scrubbing Throats High velocity atomization takes place as the inlet air is directed through the fixed and dual adjustable scrubbing throats. The easily adjustable dual throats balance the pressure drop through the air flow system high and pressure at the start-up or after system changes are made. This design feature eliminates the need for ductwork air dampers and blast gates purification that are prone high to particulate build-up and require periodic pressure maintenance. In addition, air and purification the increase in pressure drop in the high wash zone improves the overall effciency of the system. After passing through the turbulent dual throat wash zone, the air inpinges on the liquid surface, pressure changes direction and then continues through deflectors and to a large, double row moisture eliminator section. Water droplets in the airstream air are removed and drain back to the wash purification liquid reservoir tank. high The clean, pressure dry air is then recirculated to the work area or discharged through exhaust ducts.

The tangential whirling flow air pattern of both air and liquid purification ascends the multiple venturi sections with dynamic impingement creating high collection efficiency. The wash liquid is driven to the outside of the top moisture eliminator high section of the scrubber by centrifugal pressure force, then drains back to the bottom reservoir. Entrained dirt particles settle to the bottom of the reservoir. Clean wash liquid is drawn from the surface of the reservoir and ecirculated in a closed system, thus reducing water consumption. The Monroe Multiple Venturi Air Scrubber air contains no moving parts. The entry area and the venturi throats are self-cleaning. The maintenance requirements for this unit are low. It is not necessary to enter the structure purification for cleaning, as is required with many high other air scrubbers. There is no packing required, water pressure distributors to clean, nozzles to maintain, or mechanical devices to cause downtime. Once placed on line, the Monroe Multiple Venturi Air Scrubber operates continuously with sustained efficiency. Normally, the high air efficiency of a single stage Monroe Multiple Venturi Air Scrubber will handle most industrial processes.For purification difficult applications two or three stage systems are available. High removal efficiency can be achieved on chemical fumes because of excellent liquid/gas contact and long residence time. The self induced water recirculating system provides a convenient means of adding neutralizing chemicals.