industrial air filters replacements

System Design The Monroe Spiral Tube Oil Mist Collector is a two stage unit and does not require filter media for primary mist removal. The spiral tubes provide a high level of mist industrial agglomeration and removal without using filters. Centrifugal force and impaction provide the mechanism for mist removal. Dirty air is propelled down several spiral shaped impaction tubes air and a fluid film is created. The oil drains into the collector bottom. Air changes direction 180 degrees, then enters the second stage HEPA type filter typically rated at a minimum 95% efficiency at 0.3 micron particle size. filters Ideally suited for production machining operations with water soluble, synthetic or mineral coolants. Oil Re-entrainment Eliminated Due to the unique internal design of the Monroe collector, replacements the cleaned air will not re-entrain collected pollutants after the primary stage. This improves the efficiency of the separation process and extends the life of the optional final filters. The advanced design of the Monroe Spiral Tube Collector provides maximum mist and oil collection efficiency in a mechanical collector.

Self-contained, Single Unit Design The Monroe Multi-Stage Oil Mist Collector is designed to collect and remove airborne oil mist, industrial smoke, and sub-micron vapors generated by operations such as high production machining and cold forming. It is a multiple stage collector that has proven capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Multi-Stage Oil Mist Collector, high production machining areas using water soluble, air synthetic or mineral coolants can discharge clean, filtered air back into the work area, reducing system costs. Broad Range of Industrial Capacities he Monroe Multi-Stage Oil Mist Collector is available in capacities from 500 CFM to over 80,000 CFM in a single unit and may be filters integrated with existing ductwork and ventilation systems. Designed for Minimum Maintenance Air flow to filter media ratio is held low to prevent saturation blocking. This eliminates down-time due to collector malfunction and minimizes replacements periodic changing of filter media. The Monroe industrial Multi-Stage Oil Mist Collector is designed for continuous draining during operation, Design Leadership The Monroe Multi-Stage Oil Mist air Collector, with more filter media, longer operating time between filter changes, and higher collection efficiency, outperforms all other collectors in its class.

Many Configurations Available Monroe Multi-Stage Oil Mist Collectors are available in various configurations to meet your needs. Units can be suspended from the ceiling or other supporting tructures to conserve filters floor replacements space. System Design The Monroe Fiber Bed Mist Collector is a custom designed unit consisting of a continuous-duty, aerosol coalescing industrial filter, fan air assembly and, filters when needed, an optional pre-filter stage. Mist is coalesced using Koch-Otto York FLEXIFIBER® mist eliminators consisting of fine fibers. replacements The compacted media is industrial in the form of cylindrical units. These long-life filters can provide several years of service before replacement is necessary. When the mist contains heavy droplets and/or dust particles, pre-filtering is provided by separate filters. The Monroe Fiber Bed Mist Collector is available in capacities from 500 to air and filters 50,000 CFM in a single unit and may be integrated with existing duct work. The Monroe Fiber Bed Mist Collector is well suited for many oil mist applications including high production machining, asphalt fumes and synthetic fiber processing. Many industrial and chemical applications generate sub-micron mists. The Monroe Fiber Bed Mist Collector, developed after replacements lengthy research and testing, is an ideal solution for these troublesome mists. Mist particles are efficiently removed through interception, inertial impact, diffusion (Brownian movement) and gravitational sedimentation.