industrial air manufacturing

Optional automatic conveyors for drag industrial removal of heavy, settled particulate and oil recovery units provide additional wash liquid cleaning for more efficient operation. The air Monroe Air Scrubbers are constructed Dual Throat of mild steel for most applications. However, where the intended use will involve corrosive or highly abrasive contaminants, other construction materials such as stainless steel or reinforced fiberglass, as well as special coatings are availiable. Moisture eliminators also are constructed of materials suitable for the intended application, including polyethylene manufacturing or stainless steel. Complete electrical controls are available to meet customer specific requirements. Monroe Dual can be configured to meet specific needs. Units can be drag equipped with conveyors to remove heavy, settled particulate and oil recovery units to remove accumulated oil. The Monroe Venturi Air Scrubber is a unique industrial design, wet type, high velocity, high efficiency unit, with no moving parts. It is designed to remove airborne contaminants from industrial exhaust systems and process air gases. The airflow itself activates turbulent washing action without a pump. The air and scrubbing liquid, alternately flow in and out of small venturi slots in the multiple venturi section.

Monroe carefully selects fiber bed filters to give constant efficiencies as high as 99.99% on all mist particles. For special applications, when mist is generated at high temperatures, Monroe provides custom designed condensing heat exchangers. Gas to air or gas to water heat exchangers are offered, depending upon application. For heavy duty operations where the mist is dirty manufacturing or dust-laden, or when large oil droplets exist, Monroe provides multi-stage filtration with various pre-filtering elements followed by the fiber industrial bed filters. The air Monroe Coalescing Oil Mist Collector is designed to collect and remove airborne oil mist, smoke manufacturing and sub-micron vapors generated by operations such industrial as high production machining and cold forming. It air is a multiple stage collector that has proven capabilities manufacturing exceeding 99% efficiency on many installations. After installation of a Monroe Coalescing Oil Mist Collector, high production machining areas using water soluble, synthetic or mineral coolants industrial can discharge clean, filtered air back into the work area, reducing climate control costs. The Monroe Coalescing Oil Mist Collector is available in capacities from 500 CFM to over 80,000 air CFM in a single unit, and may be integrated with existing ductwork manufacturing and ventilation systems.

For over thirty years, major automotive and general industrial manufacturers have come to rely on Monroe Environmental as their preferred source for maintaining superior air quality throughout their operations. Browse our site to better understand the products and services we offer. Thanks for visiting MonroeEnvironmental.com. For oil mist, smoke and vapor removal from metal cutting fluids, metal processing coolants, synthetic fiber processing oils and other mist applications. Because industrial and air of our experience, Monroe is able to provide equipment and services to meet in-plant level criteria of 0.5mg/m3 or less. oil, mist, smoke and vapor removal efficiencies to 99.9% on 0.3 micron 500-80,000 CFM standard unit capacities, special designs available continuous drain low maintenance low energy requirements ergonomic considerations manufacturing HEPA filter option is available as final filter stage Applications: metal cutting, metal forming, parts washer exhaust, steel and aluminum, rolling mills, and synthetic fiber processes.