industrial electronic air cleaners

Recirculate Clean Air In many installations, such as buffing and polishing, metal finishing and grinding foundry operations etc., it is possible to recirculate clean, contaminant-free air back to the work area. This reduces the cost of plant ventilation systems and climate control needs. Proven High Efficiency Monroe Dual Throat Air Scubbers are currently industrial operating continuously at high efficiency in many types of industrial installations throughout the United States, Mexico and Canada. Cartridge electronic and air cleaningis accomplished by reverse compressed air pulses cleaners through a few cartridges at a time, industrial allowing continuous operation without shut-down. electronic These reverse pulses, with a velocity of twice air the speed of sound, break away caked dust from the cartridge so that it can drop the collector bottom. Because of slower internal velocities through the collector, media replacement and maintenance labor costs are reduced. Collected oil mist and solids are continuously drained from the media without shut-down, significantly prolonging filter life and lowering overall operating costs. The Monroe Fiber Bed Mist Collector removesparticles cleaners as fine as 0.3 micron. While normal filters permit these particles to re-entrain industrial into the outgoing clean air, Monroe''s self-draining filter is designed to prevent oil re-entrainment and recirculate electronic clean air to the atmosphere.

The Monroe Spiral Tube Collector features heavy gauge mild steel and stainless steel construction for years of efficient performance. Welded seams and built-in air and cleaners lifting hooks provide rugged durability. industrial HEPA Type Filters The Monroe Spiral Tube Collector is available with specially constructed HEPA type fiberglass filter cartridges as the optional final filter electronic system. These filters are normally supplied with a air 95% efficiency rating at 0.3 micron. Final filters have a long service life because the majority of airstream contaminants are removed cleaners by the spiral tube stage. Slide-out industrial design electronic for easy filter removal is included. Special Features Large, easy to open access doors for all serviceable areas. An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or a "V" belt drive. Quiet operation. Rubber isolation fan air connection and sound attenuators are available if needed. Under 80dba is typical. Integral differential pressure gauges are available to indicate when filter maintenance is required. Complete electrical controls are available to meet customer specific requirements. Monroe Spiral Tube Collectors can be configured to meet specific cleaners needs with numerous options available to industrial provide electronic maximum efficiency air in cleaners any application.