industrial filter and air

Recirculate Clean Air In many installations, such as buffing and polishing, metal finishing industrial and grinding foundry operations etc., it is possible filter to recirculate clean, contaminant-free air back to the work and area. This reduces the cost of plant ventilation systems air and climate control needs. industrial Proven High Efficiency Monroe Dual Throat Air Scubbers are currently operating continuously at high efficiency filter in many types of industrial installations throughout the United States, Mexico and Canada. Cartridge cleaningis accomplished by reverse compressed air pulses through a few cartridges at a time, allowing continuous and and air operation without shut-down. These reverse pulses, with a velocity of twice the speed of sound, break away caked dust from the cartridge so that it can drop the collector bottom. Because of slower internal velocities through the collector, media replacement industrial and maintenance labor costs are reduced. Collected oil mist and solids are continuously drained from the media without shut-down, significantly filter prolonging and filter life and lowering overall operating costs. The Monroe Fiber Bed Mist Collector removesparticles as fine as 0.3 micron. While normal filters permit these particles to re-entrain into the outgoing clean air, Monroe''s self-draining filter is designed to prevent oil re-entrainment and recirculate clean air to the atmosphere.

For air over thirty years, major industrial and filter automotive and general and industrial manufacturers have come to rely on Monroe Environmental air as their preferred source for maintaining superior air quality throughout industrial their operations. filter Browse our site to better and understand the products and services air and industrial we offer. Thanks for visiting MonroeEnvironmental.com. For oil mist, smoke and vapor removal from metal cutting fluids, filter metal processing coolants, synthetic fiber processing oils and other mist applications. Because of our experience, Monroe is able to provide equipment and services to meet in-plant level criteria of 0.5mg/m3 and or less. oil, mist, smoke and vapor removal efficiencies to 99.9% on 0.3 micron 500-80,000 CFM standard unit capacities, special designs available continuous drain low maintenance low energy requirements ergonomic considerations HEPA filter option is available air and industrial as final filter stage Applications: metal cutting, metal forming, parts filter washer and exhaust, steel and aluminum, rolling mills, and synthetic air fiber processes.