ventilation air exchangers

Self-contained, Single Unit Design ventilation The Monroe Multi-Stage Oil Mist Collector air is designed to collect and remove airborne oil mist, smoke, and sub-micron vapors generated by operations such as high production machining and cold forming. It is a multiple stage exchangers collector that has proven capabilities exceeding 99% efficiency on many installations. After installation of a Monroe Multi-Stage Oil Mist Collector, high production machining areas using water soluble, synthetic or mineral coolants can discharge ventilation clean, filtered air back into the work area, reducing system costs. Broad Range of Industrial Capacities he Monroe Multi-Stage Oil Mist Collector is available in capacities from 500 air CFM to over 80,000 CFM in a single unit and may be integrated with existing ductwork and ventilation systems. Designed for Minimum Maintenance Air flow exchangers and ventilation to filter media ratio is held low to prevent saturation blocking. This eliminates down-time due to air collector malfunction and minimizes periodic changing of filter media. The Monroe Multi-Stage Oil Mist Collector is designed for continuous draining during exchangers operation, Design Leadership The Monroe Multi-Stage Oil Mist Collector, with more filter media, longer operating time between filter changes, and higher ventilation collection efficiency, outperforms all other collectors in its class.

Monroe air carefully selects fiber bed filters to give constant efficiencies as high as 99.99% on all mist particles. exchangers For special applications, when mist is generated at high temperatures, Monroe provides custom designed condensing heat exchangers. Gas to air ventilation and air or gas to water heat exchangers are offered, depending upon application. For heavy duty operations where the mist is dirty or exchangers dust-laden, or when large oil droplets exist, Monroe provides multi-stage filtration with various pre-filtering elements followed by the fiber ventilation bed filters. The Monroe Coalescing Oil Mist Collector is designed to collect and remove airborne oil mist, smoke and sub-micron vapors air generated by operations such exchangers as high production ventilation machining and cold forming. It is a multiple stage collector that has proven capabilities exceeding 99% efficiency on many installations. air After installation of a Monroe Coalescing Oil Mist Collector, high production machining areas using water soluble, synthetic exchangers or mineral coolants can discharge clean, filtered air back into the work area, reducing climate control ventilation costs. The Monroe Coalescing Oil air Mist Collector is available in capacities from 500 CFM to over 80,000 CFM exchangers in a single unit, and may be integrated with existing ductwork and ventilation and air and exchangers ventilation systems.