ventilation air flow

For over thirty years, major automotive and general industrial manufacturers have come to rely on Monroe Environmental as their preferred source for maintaining superior air quality throughout their operations. Browse our site to better understand the products and services we offer. Thanks for visiting MonroeEnvironmental.com. For oil mist, smoke and ventilation vapor removal from metal cutting fluids, metal processing coolants, synthetic fiber processing oils and other mist applications. Because of our experience, Monroe is able to provide equipment and services to meet in-plant level criteria of 0.5mg/m3 or less. oil, mist, smoke and vapor removal efficiencies to 99.9% on 0.3 micron 500-80,000 CFM standard unit capacities, special designs available continuous drain low maintenance low energy requirements ergonomic considerations HEPA filter option is available as final filter stage Applications: metal cutting, metal forming, parts washer exhaust, steel and aluminum, rolling mills, and synthetic air fiber processes.

The tangential whirling flow pattern of both air and liquid ascends the multiple venturi sections with dynamic impingement creating high flow collection efficiency. The wash ventilation liquid is driven to the outside of the top moisture eliminator section of the scrubber by centrifugal air force, then drains back to the bottom reservoir. flow and ventilation Entrained dirt particles settle to the bottom of the reservoir. Clean wash liquid is drawn from the surface of the air reservoir and ecirculated in a closed system, thus reducing water consumption. The Monroe Multiple Venturi Air Scrubber contains no moving parts. The entry area and the venturi throats are self-cleaning. The maintenance requirements for flow this unit are low. It is not necessary to enter the structure for cleaning, as is required with many other air scrubbers. There is no packing required, water distributors ventilation to clean, nozzles to maintain, or mechanical air devices to cause downtime. Once placed on line, the Monroe Multiple flow Venturi Air Scrubber operates continuously with sustained efficiency. ventilation Normally, the high efficiency of a single stage Monroe Multiple Venturi Air Scrubber will handle most industrial processes.For difficult applications two or three stage systems are available. High removal efficiency can be achieved on air chemical flow fumes because of excellent liquid/gas contact and ventilation long residence time. The self induced water recirculating system provides a convenient means of adding neutralizing chemicals.

The Monroe Oil Recovery Unit is heavily constructed for air industrial applications flow and consists of an endless belt, an electric motor and drive unit and a complete enclosure. The belt is suspended from a pulley, ventilation with the lower portion immersed in an oil supporting liquid. As the belt descends into the liquid, the floating oil adheres to both sides of the belt. Self-adjusting wipers mounted in a staggered position wipe the oil from the belt. The air recovered oil drains into a trough for deposit into a storage tank or containers. The Monroe Oil Recovery Unit operates unattended in any area of tranquil oil accumulation. It will continuously recover floating oil in a condition that permits disposal or reclaimation flow for other industrial purposes. Many different industries can prevent water pollution by recovering oily waste with a Monroe Oil Recovery Unit. Even the lightest oils from ventilation food processing can be easily removed. The Monroe Oil Recovery Unit features a totally enclosed drive unit mounted inside the housing. The compact design provides easy drive air access, excellent drive protection and maximum personnel safety. The entire drive unit is protected from weather, dirt and contaminants. The Monroe Oil Recovery flow Unit is provided with a full-width hinge door for easy access to all working components. ventilation The endless belt can be removed for repair or replacement without disassembling the unit, minimizing maintenance. The wiper assembly is self-adjusting to compensate air for wear. flow Constant pressure and alignment with the belt are assured.